Using Alternate Keyboard Functions
Many of the Tool functions and
Edit Control functions have variations that can be selected by holding
down the Ctrl, Shift and/or Alt keys.
The following tables show the standard 3DCrafter function
and the variations that are available.
As is standard in Windows, holding the Ctrl key while
highlighting an item, will add it to the current selection. Holding down the
shift key while highlighting will remove it from the current selection.
There are some exceptions which are mentioned below.
Component Selection Tool
Left-Click |
Selects highlighted component.
Hold down 1, 2 or 3 to select points, edges or faces
respectively. This is a shortcut method of using the Point/Edge/Face
selection tool. |
Right-Click |
Shows pop-up menu. |
Left-Double-Click |
Hold down Alt to select component and display its properties.
Hold down Ctrl to select the component's group and
display its properties. |
Component Selection Tool Variations
|
None |
Shift |
Ctrl-Shift |
Left-Click + A |
Selects all components in
the currently highlighted hierarchy that are of the same type as the
component you are hovering over. |
Selects all groups in the
hierarchy starting with the currently highlighted component. |
Selects all components in
the currently highlighted hierarchy. This will include all groups also. |
Left-Click + D |
Selects all components in
the currently highlighted group that are of the same type as the
component you are hovering over. |
Selects the group of the
highlighted component. |
Selects all components in
the currently highlighted group. This will include the group itself. |
Component Selection Tool - Dragging
|
None |
Alt |
Alt-Shift |
Alt-Ctrl |
Left-Click |
Moves component along the X
and Z axes. Dragging while not centered on a
component is a shortcut to using the Rectangle Selection tool to select
components. |
Scales the currently
selected component along the X and Z axes |
Scales the currently
selected component along the X, Y and Z Axes.
Scales shape equally in all directions/Adjusts light
intensity/Adjusts camera field of view/Scales bone. |
Rotates the currently
selected component about the X and Y axes |
Right-Click |
Moves component along the Y
axis. |
Scales shape along the Y
axis. |
Scales shape equally in all
directions/Adjusts light intensity/Adjusts camera field of view/Scales
bone. |
Rotates the currently
selected component about the Z axes. |
Component Selection Tool - Edit Control
|
None |
Shift |
Edit Control
Axis |
Rotates component around
selected axis. |
Rotates the view around the
selected scene component. |
Edit Control
Sphere |
Rotates component around X
and Y axes. |
Rotates the view around the
selected scene component. |
Edit Control
XZ Plane |
Moves component along X and
Z axes. |
|
Edit Control
YZ Plane |
Moves component along Y
axis. |
|
Edit Control
XZ Scale Plane |
Scales shape along X and Z
axes/Adjusts light Intensity/Adjusts camera field of view/Scales bone. |
Scales shape equally in all
directions/ |
Edit Control
YZ Scale Plane |
Scales shape along Y
axis/Adjusts light intensity/Adjusts camera field of view/Scales bone. |
Scales shape equally in all
directions |
Point/Edge/Face Selection Tool
Left-Click |
Selects highlighted item. The closest
point, edge, or face will be highlighted. |
Left-Click + 1 |
Selects the highlighted point. |
Left-Click + 2 |
Selects the highlighted edge. |
Left-Click + 3 |
Selects the highlighted face. |
Left-Click + 4 |
Selects the entire scene component. This
is a shortcut method of using the component selection tool. |
Left-Click + 5 |
Selects all faces that use the same
material as the currently highlighted face. |
Left-Click + 6 |
Selects all faces that point the same
direction as the currently highlighted face. |
Right-Click |
Shows Pop-up Menu. |
Point/Edge/Face Selection Tool - Dragging
|
None |
Alt |
Alt-Shift |
Alt-Ctrl-Shift |
Left-Click |
Moves selection along the X and Z axes.
Dragging while no item is selected is a shortcut to using
the Rectangle Selection Tool. |
Scales selection along x and z axes |
Scales selection in all directions. |
Scales a Chamfer |
Right-Click |
Moves selection along the Y axis. |
Scales selection along y axis. |
Scales selection in all directions. |
Scales a Chamfer |
Point/Edge/Face Selection Tool - Edit Control
|
None |
Shift |
Ctrl-Shift |
Edit Control Axis |
Rotates selection around selected axis. |
Rotates view around shape. |
|
Edit Control
Sphere |
Rotates selection around X and Y axes |
Rotates view around shape. |
|
Edit Control
XZ Plane |
Moves selection along the X and Z axes. |
|
|
Edit Control
YZ Plane |
Moves selection along the Y and Z axes. |
|
|
Edit Control
XZ Scale Plane |
Scales selection along X and Z axes. If
a single face is selected, the face will be scaled perpendicular to its
normal (the direction it faces). |
Scales selection equally in all
directions. If a single face is selected, the face will be scaled
perpendicular to its normal (the direction it faces). |
Scales a chamfer |
Edit Control
YZ Scale Plane |
Scales selection along Y axis. If a
single face is selected, the face will be scaled perpendicular to its
normal (the direction it faces). |
Scales selection equally in all
directions. If a single face is selected, the face will be scaled
perpendicular to its normal (the direction it faces). |
Scales Chamfer |
Rectangle Selection Tool - Dragging
Left-Click |
Selects components in the selection rectangle |
Left-Click + 1 |
Selects points in the selection
rectangle. |
Left-Click + 2 |
Selects edges that have centers in the
selection rectangle. |
Left-Click + 3 |
Selects faces that have centers in the
selection rectangle. |
Right-Click |
Shows Pop-up Menu. |
Operation Adjustment Tool
|
None |
Ctrl |
Alt |
Left-Click |
Enables the current operation for adjustment.
Dragging moves operation along the X and Z axes. |
Scales operation along the X and Z axes. |
Enables not only the current Operation for
adjustment, but also any other like-Operations that immediately precede
the current Operation in the Layers List. |
Right-Click |
Shows Pop-up Menu. Dragging moves operation along the
Y axis. |
Scales operation along the Y axis. |
|
Left-Double-Click |
Opens shape's source. |
|
|
Edit Control Axis |
Rotates operation around selected axis. |
Rotates view around shape. |
|
Edit Control Sphere |
Rotates operation around X and Z axes. |
Rotates view around shape. |
|
Edit Control
XZ Plane |
Moves operation along X and Z axes. |
|
|
Edit Control
YZ Plane |
Moves operation along Y axes. |
|
|
Edit Control
XZ Scale Plane |
Scales Operation along X and Z axes |
Scale operation equally in all directions |
|
Edit Control
YZ Scale Plane |
Scales Operation along Y axis. |
Scale operation equally in all directions |
|
Shift Tool
|
None |
Alt |
Left-Click/Drag |
Shifts the shape along X and Z axes without moving
its group. |
Shifts the shape's group axis along the X and Z Axes
without changing the shape's position. |
Right-Click/Drag |
Shifts the shape along the Y axis without moving its
group. |
Shifts the shape's group axis along the Y Axis
without changing the shape's position. |
Edit Control Axis |
Shifts the shape around the selected axis. |
Shifts the shape's group axis around the selected
axis without changing the shape's orientation. |
Edit Control XZ Plane |
Shifts the shape along X and Z axes without moving
its group. |
Shifts the shape's group axis along the X and Z Axes
without changing the shape's position. |
Edit Control YZ Plane |
Shifts the shape along the Y axis without moving its
group. |
Shifts the shape's group axis along the Y Axis
without changing the shape's position. |
Center Button/Wheel Navigation
|
None |
Ctrl |
Shift |
Ctrl-Shift |
Center Mouse Button |
While the mouse pointer is over a
component,
examines the component. Otherwise results in zooming in/out. |
While the mouse pointer is
over a component, examines the hover-over point. Otherwise results in navigation along the XZ
plane hovering over the scene. |
navigation along the XY
plane. |
zoom in/out. |
Wheel |
Zooms in/out. |
navigation along the XZ
plane hovering over the scene. |
|
|
Arrow Keys
|
Alt |
Alt-Shift |
Left Arrow |
Move along the X axis. |
Examine selected component. If no component is
selected, examine scene. |
Right Arrow |
Move along the X axis. |
Examine selected component. If no component is
selected, examine scene. |
Up Arrow |
Move along the Z axis. |
Move along the Y axis. |
Down Arrow |
Move along the Z axis. |
Move along the Y axis. |
Arrow Keys - Group Selected
|
Alt |
Alt-Shift |
Left Arrow |
Nudge group along the X axis. |
- |
Right Arrow |
Nudge group along the X axis. |
- |
Up Arrow |
Nudge group along the Z axis. |
Nudge group along the Y axis. |
Down Arrow |
Nudge group along the Z axis. |
Nudge group along the Y axis. |
Numeric Keypad
|
Ctrl |
+ |
Zoom in. |
- |
Zoom out. |
Other
In addition to the
functions listed above, the current modelling constraints and the current
modelling coordinates mode can be overridden by holding in the following
keys when using a 3DCrafter tool:
Note that above overrides only apply to the use of 3DCrafter tools. They have no effect on how operations are applied.
The following function keys are used to select highlighting modes:
Function Key |
Effect |
F2 |
Selects the standard highlighting mode. |
F3 |
Selects the Operation Direction highlighting mode. |
F4 |
Selects the Texture Wrap Preview highlighting mode. |
The following ctrl-keys are used to select tools:
Ctrl |
Effect |
A |
Selects the Operation Adjust Tool. |
B |
Selects the Material Sample Tool |
D |
Selects the Deform Tool |
E |
Selects the Material Fill Tool |
F |
Selects the Point/Edge/Face Selection tool. |
G |
Selects the Group Selection Tool. |
H |
Selects the Rotation Axis Tool |
Q |
Selects the Component Tool. |
R |
Selects the Shift Tool |
W |
Selects the Paint Tool |